1. product pro?le 1.1 general description high dynamic range optical receiver ampli?er modules in a standard sot115 package where the non-jacketed ?ber has either no connector or has an fc/apc or sc/apc connector. the ampli?er supply voltage pin and the photo diode bias voltage pin both connect to 24 v (dc). the modules have a mono mode optical input suitable for 1290 nm to 1600 nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75 w . 1.2 features n excellent linearity n low noise n excellent ?atness n standard catv outline n rugged construction n gold metallization ensures excellent reliability n high optical input power range. 1.3 applications n catv optical node systems operating in the 40 mhz to 870 mhz frequency range. bgo807; bgo807/fc0; bgo807/sc0 870 mhz optical receivers rev. 01 7 july 2004 product data sheet caution this product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. for further information, refer to philips specs.: snw-eq-608, snw-fq-302a and snw-fq-302b. msc895
9397 750 13192 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 01 7 july 2004 2 of 10 philips semiconductors bgo807/bgo807/fc0/sc0 870 mhz optical receivers 1.4 quick reference data 2. pinning information table 1: quick reference data symbol parameter conditions min typ max unit f frequency range 40 - 870 mhz s 22 output return losses f = 40 mhz to 870 mhz 11 - - db optical input return losses 45 - - db d 2 second order distortion f = 854.5 mhz - - - 55 db f equivalent noise input f = 40 mhz to 870 mhz - - 8.5 pa/ ? hz i tot total current consumption (dc) v b = 24 v 175 - 205 ma table 2: pinning pin description 1 monitor current 2 common 3 common 4+v b of the photo diode 5+v b of the ampli?er 7 common 8 common 9 output fig 1. simpli?ed outline sot115t. (bgo807). fig 2. simpli?ed outline sot115x. (bgo807/fc0). fig 3. simpli?ed outline sot115y. (bgo807/sc0). 7 8 9 2 3 4 5 1 side view mbk044 7 8 9 2 35 1 side view mbl040 4 7 8 9 24 35 1 side view mbl041
9397 750 13192 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 01 7 july 2004 3 of 10 philips semiconductors bgo807/bgo807/fc0/sc0 870 mhz optical receivers 3. ordering information 4. limiting values 5. characteristics table 3: ordering information type number package name description version bgo807 - rectangular single-ended package; aluminium ?ange; 2 vertical mounting holes; 2 6-32 unc and 2 extra horizontal mounting holes; optical input; 8 gold-plated in-line leads sot115t bgo807/fc0 - rectangular single-ended package; aluminium ?ange; 2 vertical mounting holes; 2 6-32 unc and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads sot115x bgo807/sc0 - rectangular single-ended package; aluminium ?ange; 2 vertical mounting holes; 2 6-32 unc and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads sot115y table 4: limiting values in accordance with the absolute maximum rating system (iec 60134). symbol parameter conditions min max unit f frequency range 40 870 mhz t stg storage temperature - 40 +85 c t mb operating mounting base temperature - 20 +85 c p in optical input power continuous - 5 mw esd esd sensitivity human body model; r = 1.5 k w ; c = 100 pf 500 - v table 5: characteristics in accordance with the absolute maximum rating system (iec 60134); bandwidth 40 mhz to 870 mhz; v b = 24 v; t mb =30 c; z l = 75 w . symbol parameter conditions min typ max unit s responsivity bgo807 l = 1300 nm 800 - - v/w bgo807/fc0; bgo807/sc0 l = 1300 nm 750 - - v/w fl ?atness straight line (peak to valley) f = 40 mhz to 870 mhz - - 1 db sl slope straight line f = 40 mhz to 870 mhz 0 - 2 db s 22 output return losses f = 40 mhz to 870 mhz 11 - - db optical input return losses 45 - - db d 2 second order distortion f m = 446.5 mhz [1] [2] -- - 66 db f m = 746.5 mhz [1] [3] -- - 61 db f m = 854.5 mhz [1] [4] -- - 55 db d 3 third order distortion f m = 853.25 mhz [5] [6] -- - 71 db
9397 750 13192 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 01 7 july 2004 4 of 10 philips semiconductors bgo807/bgo807/fc0/sc0 870 mhz optical receivers [1] two laser test; each laser with a modulation index of 40%; p opt = 1 mw (total). [2] f m = 446.5 mhz; f p = 97.25 mhz; f q = 349.25 mhz. [3] f m = 746.5 mhz; f p = 133.25 mhz; f q = 613.25 mhz. [4] f m = 854.5 mhz; f p = 133.25 mhz; f q = 721.25 mhz. [5] three laser test; each laser with a modulation index of 60%; p opt = 1 mw (total). [6] f m = 853.25 mhz; f p = 133.25 mhz; f q = 265.25 mhz; f r = 721.25 mhz. f equivalent noise input f = 40 mhz to 450 mhz - - 7 pa/ ? hz f = 450 mhz to 750 mhz - - 8 pa/ ? hz f = 750 mhz to 870 mhz - - 8.5 pa/ ? hz s l spectral sensitivity l = 1310 20 nm 0.85 - - a/w l = 1550 20 nm 0.9 - - a/w l optical wavelength 1290 - 1600 nm l length of optical ?ber; sm type; 9/125 m m bgo807 1 - - m bgo807/fc0; bgo807/sc0 746 - 861 mm i tot total current consumption (dc) 175 - 205 ma i bias diode bias current at pin 4 (dc) - - 25 ma table 5: characteristics continued in accordance with the absolute maximum rating system (iec 60134); bandwidth 40 mhz to 870 mhz; v b = 24 v; t mb =30 c; z l = 75 w . symbol parameter conditions min typ max unit fig 4. monitor current pin. mlb151 10 k w 1 k w pin 1 photo current
9397 750 13192 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 01 7 july 2004 5 of 10 philips semiconductors bgo807/bgo807/fc0/sc0 870 mhz optical receivers 6. package outline fig 5. package outline sot115t. unit a 2 max. c ee 1 q q max. q 1 q 2 u 2 u 1 w references outline version european projection issue date iec jedec jeita mm 20.8 9.1 0.51 0.38 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 1000 4.15 3.85 2.4 38.1 25.4 10.2 4.2 44.75 44.25 8.2 7.8 0.25 0.1 12 bf 2.5 m 1.6 m 1 0.9 m 2 n min. 10.7 0.0 n 1 5 0 n 2 16.7 16.1 optical input s 1 4.95 4.55 s 2 p 6-32 unc y w 0.7 x s dimensions (mm are the original dimensions) sot115t 0 5 10 mm scale a max. d max. d max. l min. e max. z max. rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 unc and 2 extra horizontal mounting holes; optical input; 8 gold-plated in-line leads sot115t d u 1 q q 2 q 1 b f s s 1 s 2 a z p n n 1 n 2 m m 1 m 2 e a 2 l c d q u 2 m w 789 23 4 w e e 1 5 p 1 y m b x m b y m b b 01-08-10 04-02-04
9397 750 13192 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 01 7 july 2004 6 of 10 philips semiconductors bgo807/bgo807/fc0/sc0 870 mhz optical receivers fig 6. package outline sot115x. unit a 2 max. c ee 1 q q max. q 1 u 2 u 1 w references outline version european projection issue date 01-08-10 04-02-04 iec jedec jeita mm 20.8 9.1 0.51 0.38 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 861 746 4.15 3.85 2.4 38.1 25.4 q 2 10.2 r min. 35 4.2 44.75 44.25 8.2 7.8 0.25 0.1 connector 12 bf 2.5 m 1.6 m 1 0.9 m 2 n 16.7 16.1 s 1 4.95 4.55 s 2 p 6-32 unc y w 0.7 x s dimensions (mm are the original dimensions) sot115x a max. d max. d max. l min. e max. z max. rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 unc and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads sot115x d u 1 q q 2 q 1 b f s s 1 s 2 a z p n 1 n 2 m m 1 m 2 e a 2 l c d q u 2 m w 789 234 w e e 1 5 p 1 y m b x m b y m b b 0 25 mm scale n r 0 5 10 mm scale 10.7 0.0 n 1 5 0 n 2
9397 750 13192 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 01 7 july 2004 7 of 10 philips semiconductors bgo807/bgo807/fc0/sc0 870 mhz optical receivers fig 7. package outline sot115y. unit a 2 max. c ee 1 q q max. q 1 references outline version european projection issue date 01-08-10 04-02-05 iec jedec jeita mm 20.8 9.1 0.51 0.38 0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 861 746 4.15 3.85 2.4 38.1 25.4 q 2 10.2 r min. 35 connector bf 2.5 m 1.6 m 1 0.9 m 2 n p dimensions (mm are the original dimensions) sot115y 0 5 10 mm scale a max. d max. d max. l min. e max. rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 unc and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads sot115y d u 1 q q 2 q 1 b f s s 1 s 2 a z p n 1 n 2 m m 1 m 2 e a 2 l c d q u 2 m w 789 234 w e e 1 5 p 1 y m b x m b y m b b 0 25 mm scale n r 10.7 0.0 n 1 5 0 n 2 u 2 u 1 w 4.2 44.75 44.25 8.2 7.8 0.25 0.1 12 16.7 16.1 s 1 4.95 4.55 s 2 6-32 unc y w 0.7 x s z max.
9397 750 13192 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 01 7 july 2004 8 of 10 philips semiconductors bgo807/bgo807/fc0/sc0 870 mhz optical receivers 7. handling information fiberglass optical coupling: maximum tensile strengt h = 5 n; minimum bending radius = 35 mm. 8. revision history table 6: revision history document id release date data sheet status change notice order number supersedes bgo807_fc0_sc0_1 20040707 product data sheet - 9397 750 13192 -
philips semiconductors bgo807/bgo807/fc0/sc0 870 mhz optical receivers 9397 750 13192 ? koninklijke philips electronics n.v. 2004. all rights reserved. product data sheet rev. 01 7 july 2004 9 of 10 9. data sheet status [1] please consult the most recently issued data sheet before initiating or completing a design. [2] the product status of the device(s) described in this data sheet may have changed since this data sheet was published. the l atest information is available on the internet at url http://www.semiconductors.philips.com. [3] for data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 10. de?nitions short-form speci?cation the data in a short-form speci?cation is extracted from a full data sheet with the same type number and title. for detailed information see the relevant data sheet or data handbook. limiting values de?nition limiting values given are in accordance with the absolute maximum rating system (iec 60134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of the speci?cation is not implied. exposure to limiting values for extended periods may affect device reliability. application information applications that are described herein for any of these products are for illustrative purposes only. philips semiconductors make no representation or warranty that such applications will be suitable for the speci?ed use without further testing or modi?cation. 11. disclaimers life support these products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. philips semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips semiconductors for any damages resulting from such application. right to make changes philips semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. when the product is in full production (status production), relevant changes will be communicated via a customer product/process change noti?cation (cpcn). philips semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise speci?ed. 12. contact information for additional information, please visit: http://www.semiconductors.philips.com for sales of?ce addresses, send an email to: sales.addresses@www.semiconductors.philips.com level data sheet status [1] product status [2] [3] de?nition i objective data development this data sheet contains data from the objective speci?cation for product development. philips semiconductors reserves the right to change the speci?cation in any manner without notice. ii preliminary data quali?cation this data sheet contains data from the preliminary speci?cation. supplementary data will be published at a later date. philips semiconductors reserves the right to change the speci?cation without notice, in order to improve the design and supply the best possible product. iii product data production this data sheet contains data from the product speci?cation. philips semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. relevant changes will be communicated via a customer product/process change noti?cation (cpcn).
? koninklijke philips electronics n.v. 2004 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. date of release: 7 july 2004 document order number: 9397 750 13192 published in the netherlands philips semiconductors bgo807/bgo807/fc0/sc0 870 mhz optical receivers 13. contents 1 product pro?le . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 general description. . . . . . . . . . . . . . . . . . . . . . 1 1.2 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.3 applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.4 quick reference data. . . . . . . . . . . . . . . . . . . . . 2 2 pinning information . . . . . . . . . . . . . . . . . . . . . . 2 3 ordering information . . . . . . . . . . . . . . . . . . . . . 3 4 limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 5 characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 package outline . . . . . . . . . . . . . . . . . . . . . . . . . 5 7 handling information. . . . . . . . . . . . . . . . . . . . . 8 8 revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8 9 data sheet status . . . . . . . . . . . . . . . . . . . . . . . . 9 10 de?nitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 11 disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 12 contact information . . . . . . . . . . . . . . . . . . . . . 9
|
